High Purity Hospital Used Oxygen Generator
Air Separation Plant technique is using air as raw materials, through gas expansion refrigeration precess to liquefaction of atmospheric air ,and separate Oxygen,Nitrogen and Argon from air, and obtains oxygen,nitrogen, argon products from air.
Product Parameters
| No. | Specification | OxygenVolume (Nm²/h) |
Oxygenpurity %(V/v) |
Outputpressure MPa |
Ratedpower kW |
Sickbeds |
| 1 | LXZY-1 | 1 | 0.3-0.8MPa (adjustable) |
≤5 | =20 | |
| 2 | LXZY-3.5 | 3.5 | ≤6.5 | =100 | ||
| 3 | LXZY-5 | 5 | ≤10 | 150 | ||
| 4 | LXZY-7.5 | 7.5 | ≤13 | =240 | ||
| 5 | LXZY-10 | 10 | ≤16.5 | =300 | ||
| 6 | LXZY-15 | 15 | ≤20 | 450 | ||
| 7 | LXZY-20 | 20 | ≥90%(V/V) | ≤28 | =600 | |
| 8 | LXZY-30 | 30 | ≤40 | 850 | ||
| 9 | LXZY-40 | 40 | ≤58 | 1200 | ||
| 10 | LXZY-50 | 50 | ≤78 | 1500 | ||
| 11 | LXZY-60 | 60 | ≤98 | 1800 | ||
| 12 | LXZY-80 | 80 | ≤120 | 2300 | ||
| 13 | LXZY-100 | 100 | ≤145 | 3000 |
Remarks:
1. The working environment temperature of this device is 5-40 °C.
2. Applicable beds are provided for reference only. If there are any changes to the data, the actual data provided shall prevail.
3. The installation environment and site are indoor explosion-proof areas, with an ambient temperature of ≤ 45 °C and good ventilationconditions.
4. System installation power supply conditions: 220/380V, 50HZ, when the oxygen pressure requirement is higher than 0.5MPa, it can bepressurized to the user's desired pressure.
5. The installed power in the table refers to the total power of the entire machine, with additional required power.
6. The operating noise of the system can be maintained at about 85 points.
Product Introduction
PSA oxygen generator is based on air as raw material, the use of pressure swing adsorption technology, the use of zeolite molecular sieve in the pressurized state of nitrogen adsorption capacity reduction, the formation of pressure adsorption, decompression desorption cycle process, to achieve the separation of oxygen and nitrogen in the air to produce oxygen.Pressure swing adsorption oxygen production is a physical adsorption process, so it is very safe and no environmental pollution.
Product Floor Plan
The constitution of PSA oxygen generator system
Application Area
2.Metallurgy: For anneal protection, agglomeration protection, nitrogenizing, furnace washing and blowing, etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc.
3.Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical, urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc.
4.Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc.
Certificate Of Company